Acti Clean Filter 5L

Instructions for use

sand filter

Although more restrictive, the best method, despite everything, is to pour the product directly into the open filter, onto the sand, after taking the precaution of raising the water level to the level of the sand.

• Leave the product to act for at least 1 hour with the system stopped.
•  Backwash the filter and then rinse
•  Or through the pump pre-filter or skimmer, running the pump for a few seconds to drain, to disperse the product in the filter until the color appears on the control window.
•  Leave it to act for at least half a day or even a night.
•  Against washing and rinsing the filter thoroughly, until the color completely disappears.

Cartridge Filter

•  In an adapted container, which allows the immersion of nets, supports or cartridges, dilute the ACTI CLEAN FILTER
  at the rate of 1 liter for every 10 liters of water.
•  Leave to act for at least 1 hour, brush and then rinse the elements under running water.

Dosage

•  1 liter for every 75 kg of sand for family pools, as the filter is “fast sand”.
•  1 liter for every 100 kg of sand for collective swimming pools, as the filter is “slow”.

Packaging

In 1 L and 5 L drums.