<\/p>\n
AquaFinesse SpaClean Tablets thoroughly clean the pipes and interior of your spa. Even with a new spa, water often remains in the pipes because manufacturers first test the spa before it goes on the market. This often creates biofilm and limescale in the pipes before you start using your hot tub. We also recommend cleaning with these AquaFinesse SpaClean tablets before changing the water. This is usually done every three to four months.<\/span><\/p>\n <\/p>\n <\/p>\n 1.<\/strong>\u00a0\u00a0 Remove the spa filter and make sure all jets and air valves are open for best water flow.<\/p>\n Optional: If you have granular chlorine, you can increase the chlorine level to 3-5 ppm before step 2. 2.<\/strong>\u00a0Dissolve the AquaFinesse SpaClean tablet in a bucket of warm (spa) water before adding it to the spa water.<\/p>\n 3.<\/strong>\u00a0Run pumps at full power for 20 minutes to allow good flow* 4.<\/strong>\u00a0Finish the treatment with one more activation of the pumps and then empty the spa. 5.<\/strong>\u00a0Place the filter back into the spa and you are ready to resume or begin maintenance with AquaFinesse hot tub water treatment.<\/p>\n * If foam appears during the cleaning process, do not touch or inhale it.<\/p>\n <\/p>\n <\/p>\n Hot tub water quality<\/span><\/u> or swim spa<\/span>\u00a0is of the utmost importance. Not only for hygiene and safety reasons, but also because good water treatment extends the life of your hot tub, swimming pool or swim spa. AquaFinesse water treatment applies an innovative and proven technology that attacks the living environment of bacteria in your spa water. As a result, only a minimal amount of disinfection is necessary.<\/span><\/p>\n <\/p>\n <\/p>\n <\/p>\n
\nThis comes at the expense of the lifespan of your spa and the quality of the water.
\nThen the AquaFinesse SpaClean comes in handy. This cleans your entire spa, including the piping, and thus removes biofilm and limescale build-up from your pipes.<\/span><\/p>\nSimple treatment<\/h4>\n
\nThis is recommended when the spa is very dirty.<\/p>\n
\nRepeat pump activation at least 2 to 3 times over the next 6 to 12 hours.
\n(Depending on the severity of the problem)<\/p>\n
\nRinse the spa with fresh water. (do not use any other cleaner)<\/p>\nClean, soft and crystal clear water<\/span><\/strong><\/h4>\n